加工尺寸Timber lengths to be machined:
进料长度min./max. 300mm -6300mm
Ingoing lengths
进料宽度min./max. 20 - 200 mm
Ingoing widths
进料厚度min./max. 12-80 mm
Ingoing thicknesses
木材横截面max.180 x 50 mm
Cross sectionsmax.120 x 80 mm
截出固定长度min.80 mm
Fixed length at rear of saw
板材弯度(各个方向) max. 10 mm / m
Bend of the boards
in all directions
厚度公差 +/- 3 mm
Thickness tolerance
锯切公差+/-1mm – +/-2 mm
Cutting tolerance
(在木材表面平滑和较少树脂的情况下,最小公差相对于固定长度1米以内 , 最大公差相对于固定长度2.5米以内)
(at a timber quality with a minimum share of resin and plane surface.
min. tolerance for fixed lengths up to 1 m
max. tolerance forfixed lengths up to 2.5m)
材种Timber species:软木或硬木Soft-/Hardwood
加工能力Capacity:
进料速度(无级变速)max.180 m/min.
Feed speed infinitely adjustable
锯切过程0.15 –0.3 秒
Cutting cycle(配伺服电机)
工作高度 900 mm
Working height
装机容量Connected loads:
电机功率Electric connected loadapprox. 18 kW
电压Operating voltage380 Volt / 50 Hz (C/s)
电压波动Voltage variationsmax. 5 %
压缩空气Air consumptionapprox. 1200 NL/min.
生产压力Service pressureapprox. 8 bar
压缩空气接口直径Interface diameter of air consumption ducts16mm
吸尘风速Exhaust speedapprox.25 米/秒
吸尘管直径Diameter of dust exhaust ducts160mm(1个), 80mm(1个)
基本色Basic colour灰Grey RAL 7035
蓝Blue RAL 5030